Power Supplies

Portable power for your Passport! Make your system even more portable with the DC Accessory Kit. It includes a converter that allows your Passport to be operated from the Passport battery pack. This p

This powerful sealed battery provides up to 8 hours of performance before needing to be connected to the included recharging unit. Requires the 12V DC Converter.

Make your system even more portable with the DC Converter. It allows your Passport to be operated from a 12V source, such as the optional Passport battery pack.

Provides 6-7 hours of light on a charge for the Lampcraft ConcertLight.

The CU 40 charging unit is the perfect charger for WMS 40 Microtools transmitters and the PR 40 portable receiver. Maximum charging time is one hour.

Tired of wall warts taking over your rack? This handy device consolidates all your rack's wall warts in one strip, and secures them in your rack.

The recommended power supply for the AF-70, DR-770, GR-33, GT-3, GT-6, GT-6B, GX-700, and JS-5.

14-gauge, 25' cable.

Provides 3.5 hours of light on a charge for the Lampcraft ConcertLight.

Get the power supply and quit buying those batteries. Reliable and steady (as long as the grid doesn't go down).

18V 1.0A output. Plug in and avoid battery costs!

Power adapter for Yamaha DGX and certain PSR keyboards.

Protect your gear against deadly power spikes. 6-outlet block, heavy-duty metal construction, 15' power cord, illuminated on/off switch, circuit breaker, and EMI/RFI noise attenuation make it the ulti

9 VAC power supply.

Get the supply, save on batteries. Morley 9V 300mA regulated adapter for use with all Morley pedals. Center polarity is negative. Equipped with handy LED to show that power is on.

Reliable, cheap POWER! Powers all new DOD FX pedals; the Control 8 MIDI control; and the discontinued Acoustec, Tech4X, BassTech, and VoTech pedals. 9.6V D.C.

Reliable, affordable power for your DOD pedal. Works with the DOD 250 Overdrive including the Yngwie Malmsteen Overdrive and the FX40B Graphic EQ.

For use with Tascam's CD-GT1 Portable CD Guitar Trainer.

A compact, reliable solution to the plague of dead batteries. Specially designed to provide perfect power to all Boss compact pedals. 9.6V DC 200mA, barrel connector, reverse polarity.

Powers any Guyatone micro effect.

Protect your gear against deadly power spikes. 6-outlet strip features heavy-duty metal construction, 15' power cord, illuminated on/off switch, circuit breaker, and EMI/RFI noise attenuation make it

Energy efficient. AC Power Adapter for PSR282 and lower, YPP15, YPP35, DD50, and DD20M. Input: 120V/60Hz. Output: 700Ma. 6' cable.

18VDC @ 150mA 5% regulated 2.1 mm x 5.5 mm + Barrel negative center.

Provides power to 2 - 300 Series products when rackmounted side-by-side on an RM-3 rack tray.

'Wall wart" is such an ugly word for this essential tool. Convenient, quiet power supply specifically for your Korg equipment requiring nine volts. Better than having built-in power supplies weighing

Use with Ibanez Soundtank pedals.

For powering the Ace Headphone amps.

Protect your portable computer recording setup from spikes and surges. Plugs directly into the wall and features 3 outlets plus a retractable surge-protected 6' phone cord. Also offers EMI/RFI noise a

Safety and peerless reliability for a great price! 4 outlets, heavy-duty metal construction, a 15' power cord, and lit on/off switch make it the perfect personal power supply for all your gear. Circui

Power supply for all AX models including the new AX10s. This 9V, 500mA power supply also works with other Korg products including the Electribe, DT-7, DT-10, GT-12, MS2000, MS2000R, MicroKorg and PX1

Extend your battery life by using this optional AC adapter while you're at home or near an electrical outlet. Works with Casio LK-30, CTK-520L, CTK-560, LK-33, CTK-560L, CTK-431, CTK-495, CTK-531, CTK

Reliable and affordable dedicated power line for your personal equipment. 3 - 3-prong AC receptacles on a 25' grounded cable. Rugged with heavy insulation. Very convenient.

Extend your battery life by using this optional AC adapter while you're at home or near an electrical outlet. Works with Casio LK-30, CTK-520L, CTK-560, LK-33, CTK-560L, CTK-431, CTK-495, CTK-531, CTK

For all Tech 21 floor/pedal models except SansAmp Classic. NOTE: Early models of the SansAmp GT2 with a silver mini jack (vs. black flush mount jack) use the DC1 model.

For electronic keyboards and effects. Input: 120V AC 60Hz/16W. Output: 9V DC/one amp.

Power supply for the Freedom Amp.

9V DC @ 200mA 5% regulated. 2.1mm x 5.5mm + Barrel negative center.

Comes with 4 different connectors to fit any unit. Switch-adjustable for 3V, 4.5V, 6V, 7.5V,9V,and 12V. Ideal for musical instrument accessories and battery-powered units. Supplies up to 500 mA.

Power supply for the Zoom 504, 505, 506, 507, 508, 509 and 510.

Plug in, tune up, and play! For Small Clone, Small Stone, and Bassballs pedals.

Quit consuming batteries. Zero Hum© 9V adapter for use with all Dano pedals other than the Cool Cat Chorus and others that require 18V. Kills line noise that otherwise ends up coming out of your amp.

Power adapter for the Electro-Harmonix Frequency Analyzer and Graphic Fuzz

Power adapter for the Electro-Harmonix Hot Tubes, Tube Zipper, and The Wiggler.

Lets you use all the spaces in your power strip! Power transformers (wall warts) always cover up outlets in your power strip. Plug the Wall Wart Remover into your strip and then plug a wall wart into

Power adapter for the Electro-Harmonix Holy Grail.

These environment-friendly cells last up to 4 times as long as conventional batteries. They contain no mercury, cadmium, or lead. Output is more consistent than ordinary batteries, and they're 25% li

All black cables for stage use. Flexible and very durable. Tru-Link cords have locks on female ends to prevent unexpected disconnects. Power Block cords have a 3-plug female end.